tube mill

PostTime:2015-11-09 Category:powder making machine Leave Message

Tube mill Introduction

Tube mill is the material to be broken, and then to smash the key processing equipment. Tube mill is widely used in cement, silicate products, new building materials, refractory materials, fertilizer, ferrous and nonferrous metal and glass ceramics and other production industries, tube mill for grinding all kinds of mine and other materials can be dry or wet grinding.

tube mill

Tube mill installation

1, the device should be installed on a level concrete foundation with anchor bolts.

2, the installation should pay attention to the main body vertical and horizontal.

3. After installation check all parts for loose bolts and host the doors are tight and, if requested to tighten.

4, according to the configuration of power equipment and power line control switch.

5, check is completed, the empty load test, test the normal production.

Tube mill technical parameters

Model

Specification

Production capacity

( t/h )

Rotating speed

(r/min)

Weight of ball

( t )

Power

( kw )

Main reducer

Weight

( t )

MQG1245

1200×4500

1.4-2

30.5

5.2

45

ZD30

12

MQG1557

1500×5700

3.5-4.5

29.86

12.25

115

ZD40

23

MQG1864

1830×6400

5.5-6.4

24.23

18.5

155

ZD50

34.6

MQG1870

1830×7000

6-7

23.91

21

180

ZD60

36.5

MQG2265

2200×6500

14 ~ 15

21.4

31

380

ZD70

50

MQG2275

2200×7500

16 ~ 18

21.4

32.5

400

ZD70

63

MQG2470

2400×7000

26 ~ 30

20.8

38

600

JR75

70.5

MQG3090

3000×9000

42 ~ 50

17.2

65

1000

MBY800

15.6

Tube mill maintenance

1, bearing

Bearing shoulder the entire load of the crusher machine, so good lubrication of the bearing life of a great relationship, it directly affects the life and the operation rate of the machine, which requires the injection of the lubricant must be clean, seal must be good, the machine the main oiling Office (1) Turn bearing (2) roller bearing (3) all gears (4) activities bearings, sliding plane.

2, the newly installed tire prone to loosening must always be checked.

3, pay attention to all parts of the machine is working properly.

4, pay attention to check the degree of wear parts wear, and pay attention to replacement of worn parts.

5, put the active device chassis plane should avoid activities out dust and other matter bearing on the chassis can not move the machine does not meet the crushed material, so as to cause a serious accident.

6, bearing temperature rise, should immediately stop check the reason to eliminate them.

7, the rotation of the gear in operation should be immediately stopped if the impact of sound check and eliminate

Previous:ceramic ball mill

Next:fly ball mill

Leave a message

If you have any questions, please give us a message, we will contact you soon.(*required fields)

Products: *
Your Name: *
Your Email: *
Country: *
Telephone:
Detailed requirements: